Call Us

800-423-1571

Email Us

sales@gaska.com

Follow Us

ULD400 Series

ULD400 Series

DESCRIPTION Formulated for generic sealing, cushioning and sound attenuation applications, ULD400 Series is ideal where cost is a critical factor. Possible alternative to low-density reeled or spooled urethane foams. Designed to solve your application problems, ULD Series will conform to irregular surfaces and curves.

Read More

EP900 Series

DESCRIPTION Gaska Tape’s EP900 Series is a medium density closed-cell Polyvinyl Chloride foam. Previous testing of a high quality, die cut part (shaped for use as an ear plug) of .780” thickness and 0.53” diameter resulted in an average NRR rating of 31.3 when measured from 125 to 8000 Hertz (five subjects, average of nine…

Read More

C800 Series

DESCRIPTION Gaska Tape’s C800 Series line of Cling Foam® offers a choice of materials depending upon the requirements of the application.  The C800 Series is low density closed-cell Polyvinyl Chloride foam with the unique ability to bond to non-porous surfaces without an adhesive.  It comes on a special “high gloss” paper to protect the cling…

Read More

V612-FR Series

DESCRIPTION V612-FR consists of a closed-cell Polyvinyl Chloride foam permanently cast on heavy-duty aluminum foil. Vyn-Alum acts as an effective insulator and prevents condensation or moisture build-up on surfaces to which it is applied. V612-FR is a special formulation that meets Building Materials Specification FHC 25/50 flame and smoke spread index (UL 723 Test Method).

Read More

Gaska Hi Bond Series

DESCRIPTION Gaska Hi Bond Adhesive System (GHB®) consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive system provides excellent long term holding power. The tape incorporates a strong closed-cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB® tapes…

Read More

VK Series

DESCRIPTION Gaska Tape’s VK Series products are available as a medium or high density closed-cell Polyvinyl Chloride foam.  Designed specifically as a “spacer in structural silicone curtain wall applications.” Both products are coated on each side with an aggressive high performance S3 solvent acrylic pressure-sensitive adhesive and covered with a 5 mil blue polypropylene film…

Read More

Eco Seal® Series

DESCRIPTION Eco Seal® Series products are closed-cell foam tapes specially designed for sophisticated industrial, automotive, medical and construction applications. ESL1500, medium density foam exhibits greater dimensional stability, cushioning properties and vibration dampening qualities.  Test results demonstrate that ESL1500 can be classified to 2C2 (SCE-42) as specified by ASTM D 1056 and SAE J18. ESL2100, heavy…

Read More

V2500 Series

DESCRIPTION Gaska Tape’s V2500 Series product is a heavy density closed-cell Polyvinyl Chloride foam.  Designed for use in the most demanding foam sealing or cushioning applications.  High internal strength resists pressure from outside forces and high hardness resists deterioration. Characteristics common to all closed-cell vinyl foam products include the ability to make a long life…

Read More

V1520 Series

DESCRIPTION Gaska Tape’s V1520 Series product is a medium density closed-cell Polyvinyl Chloride foam coated both sides with an aggressive, pressure sensitive adhesive, A3, and 84# polycoated two side, brown kraft liner. V1526 is the same medium density foam; A3 adhesive coated on both sides, but incorporating a 4 mil blue polypropylene film liner. V1526SA…

Read More

V1500 Series

DESCRIPTION Gaska Tape’s V1500 Series product is a medium density closed-cell Polyvinyl Chloride foam.  The tape provides an excellent combination of flexibility and conformability with strength and wear resistance.  Performs in those “tough duty” applications where a tape must still flex to fit and seal. Characteristics common to all closed-cell vinyl foam products include the…

Read More